Complete Particleboard Production Line for Particle Board Plant

1.Chip preparation section
Raw material is reduced into qualified chips by the drum chipper, then the chips are transported to the chip bin, and then feed to the knife-ring flaker by which the chips are turned to flakes, then the flake stored in wet flake bin.

2. Drying and sifting section
The flakes discharged from the wet flake bin are conveyed to the rotary dryer. Qualified core flakes are stored in core flake bin; oversize flakes are send to mill to be re-crushing, and transported to surface flake bin.

6.Cooling and trimming section
The rough board is conveyed to star-cooler for cooling, then the rough board goes through side trimming saw and become a qualified particle-board, stacked on the hydraulic lifter.

8. Sanding Section
The board after cutting, then will be transfer to the sanding section. the board will be sanded three times, then will be stacked and classfied.

^ Company
We are  the leading manufacturer in woodworking industry in Linyi City, China. Our main products are plywood line and particle board line, and there are also factories for plywood, particle board and MDF producing.

Customers cover most of the world, from Vietnam, Indonesia, India, Iran, Dubai, Nigeria, Algeria, South Africa, Garner, Brazil, American and Russia.

^ Our Service
1.We will send our engineer under your indications to  your  factory  for  installing,  debugging  and  maintaining,  you only need to afford the cost of the flights, and  the engineer's accommodation .

2.After the warranty, we can also supply the engineer service and the technical service, but  you need to  pay  the salary for the engineer! and afford the cost of the replaced aparts yourself.