10000cbm Woodworking Particle Board Production Line

Particle board/ Chip board production line, is using small diameter logs. tree branches and twigs, industrial wood residue as raw materials to produce gradual changing structured or homogeneous particle board. Applications include furniture, construction, packaging, vehicles, ships and so on. 

Production process: the production line is divided into 4 working sections: Flake preparation, Drying and sifting section, Glue mixing and blending section, Forming/Press/Sanding section. Between the sections there is electrical interlock. When unlocked, single machine can be controlled individually.

THE CAPACITY AVAILABLE

1) Chip preparation section

Raw material is reduced into qualified chips by the drum chipper, then the chips are transported to the chip bin, and then feed to the knife ring flaker by which the chips are turned to flakes, then the flake stored in wet flake bin.

2) Drying and sifting section                

The flskes discharged from the wet flake bin are conveyed to the rotary dryer. Qualified core flakes are stored in core flake bin; oversize flakes are send to mill to be recrushing, and  transported to surface flake bin.

4) Forming and hot-pressing section

The surface and core flakes are sent into classi forming machine, and forming on the mat conveyor uniformly. After process of metal remover , pre-press, lengthwise saw, cross saw,accelerate conveyor,scaling conveyor , 

storing conveyor and loading conveyor,mats are transported to carrier and then to hot pressing. Rough boards after pressing are pushed to unloader via pallet.

5) Cooling and sizing section 

The rough board is conveyed to star cooler for cooling ,then the rough board goes through side trimming saw and become a qualified particle-board, stacked on the hydraulic lift.

6) Sanding section     

The board are sanded,checked and stored. PLC control is used in mat-forming section.

Main advantages:Our hot press is equipped with a microcomputer control system for both manual and automatic control. With a simple push of a button you can control a whole set of processes including pressing plate ascending, closing, pressure adding, pressure maintaining, timing and pressing plate descending.

Our main products: complete plywood equipment, complete particleboard equipment, complete MDF equipment, short-cycle laminating equipment, complete block board equipment and other wood-based machinery. Moreover we can produce hot press, cold press, forming machine, edge trim saw, glue spreader and other woodworking machines according to customers' requirement.

Founded in year of 1993, LINYI RUIFENG MACHINERY FACTORY now is one of the professional wood-based panel machinery manufacturers in China. 25 years' hard work and innovation, RUIFENG becomes to the most reliable brand in domestic market. We do produce all kinds of wood machinery, especially the Forming machine, Cold press, Hot Press, Dryer as well as other machines. And we are capable to produce whole production lines like OSB Line, MDF/HLD Line, Particle Board Line, Block Board Line as well as Plywood Line. We successfully installed wholes lines in Russia, Uzbekistan, Vietnam, Ethiopia as well as other countries.

We have Engineering team to make layout design for customers and to supply reasonable solutions according to request like the raw materials, the designed annual output, the environment policy as well as other facts. And we have Technician team to supply customers professional after-sales service like overseas installation, worker's training, equipment adjustment and equipment maintenance.

From domestic market to overseas market, RUIFENG grows up to be stronger and will be much more stronger in the cooperation with more and more customers all over the world.

We have more than 20 years manufacturing experience,we are factory, not just trading company we will supply you the reliable quality and timely technical support service.

Pre-sale services:

1.Provide the free consultation of the equipment
2.Provide the standard device and the flow chart

3.According to the clients' special requirement, offering the reasonable plan and

 free design helping to select the equipment.
4. Welcome to visit our factory

Services during the sales:

1. Whether you will come (or not) we will let you know the latest progress of producing machines in a timely manner of 

2. Inspect&running the machine before leaving the factory no matter you come or not

After service:

1.Professional oversea installation team,with much experience of installing and debugging

2.Helping to train operator,make them  solve any problems by themselves.

1.    Q:A FACTORY OR A DEALERS?

       A:We are a factory who have been producing wood based panel machinery for  25 years.

2.    Q:QUALITY CONTROL?

       A: Each machine will be tested three times before delivery.

3.    Q:DELIVERY TIME?

       A: 30-90 days upon receiving deposit.

4.    Q:Factory Layout Design?

       A:We have engineer team to make layout drawing for customers for free.

5.    Q: After-sales Service?

       A: We have technician team to help customers on installation.

6.    Q:WARRANTY?

       A: One-year warranty,and we supply parts and service all the time.

7.    Q:PAYMENT TERMS?

       A: T/T, L/C are accepted.

8.    Q:MOQ?

       A: The MOQ is 1 set.

9.    Q: How to go to your factory?

       A: There's three flights per day from SHANGHAI, one flights per day from GUANGZHOU. It takes 45 mins from airport(LINYI AIRPORT) to our factory.
WELCOME YOU TO VISIT OUR  FACTORY!
Jason Liu
Tel:+86 17661506998