Particle Board/MDF Lamination Hot Press Line for Melamine Laminating

particle board production line machine

DESCRIPTION

1)Main Features
1. Framework adopt high quality steel, heighten and thicken, solid and durable.
2. New model high grade pump station, lower noise, more stable performance.
3. Adopting new model four-bar linkage synchronizer, synchronous effect more stable.
4. Cylinders adopt high temperature resistance oil seal and macromolecule heat insulation board
5. All adopt high grade electrical appliance and hydraulic parts, very low failure rate.
6. Professional custom 4*8ft, 6*8ft, and 6*12ft short cycle melamine laminate hot press and production line. 

CONTROL SYSTEM 
1.Micro-computer , manually/automatic controlled . 
2.It can lift or descend the hot plated, add the pressure , keep the pressure and time . 
 
HOT PLATEN 
1.excellent carbon soild steel , high precision and strength, durable. 
2.It is manufactured on special workable , easy to operate . 
CYLINDER
1.Excellent carton solid steel , high strength and durable . 
2.It uses high quality oil envelop, to avoid of oil leaking . 
HYDRAULIC STATION 
1.It can be heated by steam boiler , oil heater or electric oil heater . 
2.The steam boiler is low  in cost  and suitable  for common production . 
 
MAIN FRAME 
Excellent carbon solid steel , high strength and durable . 

Size:1830mm*3660mm or 1220mm*2440mm or other sizes
 
1.  2400 Ton 6 by 12 feet short cycle lamination press machine is widely used in veneering surface decoration patterns of furniture borad, common ones are melamine veneering for MDF and particle board.
2. This 2400 Ton6 by 12 feet short cycle lamination press machine is PLC control,adopting touch screen operation. It can easily set the time and pressure,with a password set.
3. The 2400 Ton 6 by 12 feet short cycle lamination press machine contains following parts, such as trolley, top petrol, discharge shelf, cabinet, hydraulic pressure station, tools and so on.
mdf press machine laminate;short cycle melamine laminating press machine;short cycle melamine laminating hot press       2400 Ton  short cycle lamination press machine

-  To make Melamine Laminate furniture board.
-  The covering wood furniture materials are melamine paper, veneer etc.
-  The wood furniture core boards are MDF / HDF / Particle Board.

2)Operating procedures
(1) with a feather duster first to sweep the dust on the surface of the workpiece, with
the oil must be cleaned up, and then coated with glue evenly
(2) setting pressure of hot press (generally for 100 ~ 150 (pa), temperature
(100 °C ~ 110 °C), time (generally for 5 ~ 8 minutes);
(3) the workpiece after coating is covered two sub-companies named seaport in the hot press;
(4) each pressure plate of a specification, must be first checked, inspect if the board is shift, whether glue is strong;
(5) the end of the work, cut off power , clean up the remaining material, etc.

3) Our factory
Linyi Ruifeng Machinery Factory : Founded in year of 1993, LINYI RUIFENG MACHINERY FACTORY now is one of the professional wood-based panel machinery manufacturers in China. 25 years' hard work and innovation, RUIFENG becomes to the most reliable brand in domestic market. We do produce all kinds of wood machinery, especially the Forming machine, Cold press, Hot Press, Dryer as well as other machines. And we are capable to produce whole production lines like OSB Line, MDF/HLD Line, Particle Board Line, Block Board Line as well as Plywood Line. We successfully installed wholes lines in Russia, Uzbekistan, Vietnam, Ethiopia as well as other countries
We have Engineering team to make layout design for customers and to supply reasonable solutions according to request like the raw materials, the designed annual output, the environment policy as well as other facts. And we have Technician team to supply customers professional after-sales service like overseas installation, worker's training, equipment adjustment and equipment maintenance.
From domestic market to overseas market, RUIFENG grows up to be stronger and will be much more stronger in the cooperation with more and more customers all over the world.



4) Main production line
Our main products are Particle board production line, Plywood production line, MDF production line, Melamine veneer press,Mould door equipment etc. based on our good quality as well as perfect service ,our business scope expands extensively both at home and in more than 20 countries such as  Ethiopia ,Vietnam, India Malaysia, Pakistan Bangladesh, Russia, Turkey and so on. And they are all well praised by our clients

5)Our Service
Pre-sale services:
1)Provide the free consultation of the equipment.
2)Provide the standard device and the flow chart.
3)According to the clients' special requirement, offering the reasonable plan and free design to help to select the equipment
4)Welcome to visit our factory

Services during the sales:
1)Inspect the machine before leaving the factory
2)Oversea install and debug the equipment
3)Train the first-line operator
After sale services:
1)24 hours online service
2)Provide the VIDEO with install and debug the equipment
3)Provide technical exchanging
Welcome to INQUIRY and Visit our factory,please contact with me any time.

Best Regards
Kevin Xu

 


Ruifeng Machinery®
Largest wood-based panel machinery manufacturer in China
ruifeng.en.made-in-china.com
Find us on Alibaba, Facebook and YouTube